Solar Charge Controller SRM12/24-20SL

Solar Charge Controller SRM12/24-20SL 1. Battery Voltage: 12V/24V auto & Charge Current: 20A & Discharge Current: 20A 2. Epoxy resin sealed for waterproof(IP68 ), CE and ROHS certificate . 3. Overloading & Short-circuit protection. Reverse discharging & reverse-polarity protection. 4. Solar Charge Controllers are built-in electronic fused that do not require replacements. 5. The Solar Charge Controller has a low failure rate and will last a long time and protected with moisture-tight coating, minimizing damage from humidity and from nesting insects. 6. Easy to set up and operate. Suitable for home, industrial, commercial etc. Solar Charge Controller Description Size: 20A Specifications: Solar Charge Controller has specifically designed to meet the needs of the rural electrification market. Working Temperature: -35°C to +60°C Self consume: ≤10mA Float Charge: 13V(default, adjustable) Discharge stop: 10.7V(default, adjustable) Discharge reconnect: 12.6V(default, adjustable) Size: 133x70x32mm LED display PWM battery charging All necessary protections equipped Adjustable controlling parameter of the system Suitable for Home, Industrial, Commercial etc. Note: 1. The function of the Solar Charge Controller is to protect the voltage overshoot and discharge. 2. When the battery voltage is too low, the controller to stop output; after the solar panels charging, the battery will return to 12.6 v. It is a natural to output. 3. 12.6 v is to restore the discharge voltage. 4. When the solar panels to recharge battery float charging voltage can be achieved. It will stop charging. This is called overshoot protection. 5. After the battery discharge, the battery outside will flash, this is to remind the user, the configuration is not reasonable, it need to take battery connection. 6. The Solar Charge Controller normal voltage of 10.8 v to 13.7v. This two voltage fluctuation, you can be set manually If you got trouble in using please try to adjust the Float Voltage to 13.7V: Firstly, you need to long press the "MCU control" button about 3-4 s, and then there will be a management interface on the screen. Secondly, you have to press the "Add" button under the screen until the voltage reaches 13.7 volts. Lastly, you need to re-press the "MCU control" button again, when the display doesn't blink anymore it saves controller recording the data. Package Includes: 1 x Solar Charge Controller 1 x User Manual

Posted on