USB Rechargeable LED Laser Bike Tail Light

Model NO.: HW-8L
Battery Type: Lithium Battery
IP Rating: IP55
Material: Plastic
Certification: CE, RoHS
Mounting Placement: Seatpost
Battery: Lithium Battery
Gross Weight: 0.2kg
Color: Red/Blue/White/Green
Size: 22*15*5cm
Trademark: Haiwang
Transport Package: 50sets/Carton
Specification: CE&ROHS
Origin: Shenzhen, Guangdong
HS Code: 8512100000
Model NO.: HW-8L
Battery Type: Lithium Battery
IP Rating: IP55
Material: Plastic
Certification: CE, RoHS
Mounting Placement: Seatpost
Battery: Lithium Battery
Gross Weight: 0.2kg
Color: Red/Blue/White/Green
Size: 22*15*5cm
Trademark: Haiwang
Transport Package: 50sets/Carton
Specification: CE&ROHS
Origin: Shenzhen, Guangdong
HS Code: 8512100000

Item Spec:
1.Rechargeable led Bicycle Light 
2.Water Proof function 
3. 8LED+2 laser diode,continuous working 6-8h; 
4. R/G/B/W 4 COLORS 
Shell Color: Red,green,blue and white,other colors can be customized.
5.Power Supply: Input 100-240 VAC   50/60 Hz   0. 5 A
Charge voltage 4.2-5VDC-500 mA
6.Battery: 14500 rechargeable battery
7.Work Time: continuous wok time ≥6hours
8.Charge Time:5hours(Note:when the charger warning light is red, it shows charging state;when is green,shows completed)

 Laser Color: 658±5 nm(red color)
Laser Light Power: ≤5 mW
Four Colors Optional:Red,Green,Blue,white
 
Product Introduction:
The Intelligent Diamond Appearance Bicycle Light +Laser Bicycle TailLight is the newest product in China mainland. It has novel, generous and streamline appearance. We have owned design patents include exterior and inner structure, And it has Approved RoHs, CE certification for export to overseas Countries. Quality as Diamond desirable possession.
Standard Configuration:8LED + 2 Laser Lights+ A set of clamp.

Bicycle Light Function Introduction:
Laser Parallel
Projecting two red parallel lines both side of the bicycle, the tail light adopted imported laser technology which make the laser line longest, strongest and brightest
Intelligent IC
The function is more convenient with its inside high quality intelligent IC
Water-proof technology
The tail light can be used in the rainy days normally with the special treatment shell and PCB circuit board.

Using Introduction:
1.  Fixed the holder on bicycle seat post first ,then install the laser tail light.
2.  Press the LD key 3 times to keep it brightness, then adjust the angle to keep the bicycle and laser lines parallel.
3.  When battery going lower advise turnoff laser line to keep LED lights brightness.
 
Accessories Content: 
1. 2* AAA batteries
2.Plastic holder
3.Retail Package





 
Item Spec:
1.Rechargeable led Bicycle Light 
2.Water Proof function 
3. 8LED+2 laser diode,continuous working 6-8h; 
4. R/G/B/W 4 COLORS 
Shell Color: Red,green,blue and white,other colors can be customized.
5.Power Supply: Input 100-240 VAC   50/60 Hz   0. 5 A
Charge voltage 4.2-5VDC-500 mA
6.Battery: 14500 rechargeable battery
7.Work Time: continuous wok time ≥6hours
8.Charge Time:5hours(Note:when the charger warning light is red, it shows charging state;when is green,shows completed)

 Laser Color: 658±5 nm(red color)
Laser Light Power: ≤5 mW
Four Colors Optional:Red,Green,Blue,white
 
Product Introduction:
The Intelligent Diamond Appearance Bicycle Light +Laser Bicycle TailLight is the newest product in China mainland. It has novel, generous and streamline appearance. We have owned design patents include exterior and inner structure, And it has Approved RoHs, CE certification for export to overseas Countries. Quality as Diamond desirable possession.
Standard Configuration:8LED + 2 Laser Lights+ A set of clamp.

Bicycle Light Function Introduction:
Laser Parallel
Projecting two red parallel lines both side of the bicycle, the tail light adopted imported laser technology which make the laser line longest, strongest and brightest
Intelligent IC
The function is more convenient with its inside high quality intelligent IC
Water-proof technology
The tail light can be used in the rainy days normally with the special treatment shell and PCB circuit board.

Using Introduction:
1.  Fixed the holder on bicycle seat post first ,then install the laser tail light.
2.  Press the LD key 3 times to keep it brightness, then adjust the angle to keep the bicycle and laser lines parallel.
3.  When battery going lower advise turnoff laser line to keep LED lights brightness.
 
Accessories Content: 
1. 2* AAA batteries
2.Plastic holder
3.Retail Package





 

Other Cosmetic Bottle Cap

Plastic Bottle Cap,Twist Top Cap,Pet Bottle Caps

Ruichang Commodity Packaging Co., Ltd. , http://www.nbcosmeticpackaging.com

Posted on